In circuit board factories, there are numerous types of manufacturing technologies for ceramic products; it is said that there are more than 30 different manufacturing processes, such as dry pressing, slip casting, extrusion, injection molding, tape casting, and isostatic pressing, among others. Since electronic ceramic substrates are “flat plate” types (in the form of squares or discs) with relatively simple shapes, and since manufacturing processes such as dry forming and machining are relatively simple and cost-effective, dry pressing is the method most commonly used. This article will explore in detail the manufacturing process of electronic ceramic substrates, including green body fabrication, sintering of green bodies, post-sintering finishing, and the process of forming conductive patterns (circuit lines) on the substrates.

1. Green Body Manufacturing (Shaping)
The manufacturing process for electronic ceramic substrates begins with the production of green bodies, which is the first step in making ceramic substrates.
(1) Manufacturing green bodies using the dry pressing method
Dry-pressed green bodies are formed by mixing high-purity alumina powder (Al₂O₃ content ≥ 95%) with additives (primarily binders, dispersants, etc.) to create a “slurry” or processing material. This slurry is then dry-pressed into green bodies. Currently, the ceramic substrates produced—in the form of squares or discs—can achieve a thickness of 0.50 mm or even thinner (depending on the substrate dimensions).
Dry-pressed green parts can be machined before sintering, such as for external dimensions andDrillingetc., but it is important to note that sintering causes dimensional shrinkage, so dimensional compensation is necessary to maintain accuracy.
(2) Manufacturing green bodies using the cast-filament process
The cast-film method for manufacturing green bodies is an automated, large-scale manufacturing process. It involves uniformly mixing alumina powder with solvents, dispersants, binders, and plasticizers, and then evenly coating the mixture onto a metal or heat-resistant polyester tape using a cast-film machine. This is followed by a series of processes, including drying, trimming, degreasing, and sintering.
2. Sintering of Green Parts and Post-Sintering Finishing
After being manufactured, the green parts must undergo sintering and post-sintering finishing.
(1) Sintering of Green Parts
The sintering of ceramic green bodies is a critical step that involves the volatilization, combustion, and compression of voids, air, impurities, and organic matter within the green body through a high-temperature sintering process to eliminate them, while simultaneously bringing the alumina particles into close contact or causing them to grow together. This process results in changes such as weight loss, dimensional shrinkage, shape deformation, increased compressive strength, and reduced porosity in the sintered body.
There are three methods for sintering ceramic green bodies: atmospheric pressure sintering, pressure (hot-press) sintering, and hot isostatic pressing. Atmospheric pressure sintering is performed without applying pressure, but it may lead to problems such as significant deformation. Pressure (hot-press) sintering is performed under pressure and produces parts with good flatness; consequently, this method is currently the most widely used. Hot isostatic pressing, on the other hand, utilizes high-pressure, high-temperature gas for sintering and is typically used for high-value-added products, such as those in the military sector.
The sintering temperature for alumina green bodies produced by the dry pressing method typically ranges from 1200°C to 1600°C (depending on the composition and flux).
(2) Post-sintering finishing
Sintered ceramic green bodies typically require finishing to achieve a flat surface and a high degree of surface finish. During the high-temperature sintering process, irregularities in the green body—such as uneven particle distribution, voids, impurities, and organic matter—can lead to issues like deformation, surface unevenness, and excessive roughness. These defects can be resolved through surface finishing. Typically, surface polishing involves the use of polishing materials (such as SiC or B₄C) or diamond paste, with the process carried out through successive stages of grinding. Finally, surface treatment is performed using methods such as Al₂O₃ powder with a particle size of ≤1 μm, diamond paste, lasers, or ultrasonic waves to achieve a high surface finish.
In addition, to improve mechanical strength, after surface polishing, ceramic green bodies can be coated with a layer of silicon compounds using methods such as electron beam vacuum deposition, vacuum sputtering, or chemical vapor deposition (CVD) to apply a layer of silicon compound, followed by heat treatment, thereby significantly improving the mechanical strength of the ceramic green parts.
3. Forming conductive patterns (circuits) on the substrate
Finally, to process conductive patterns (circuits) on a ceramic substrate, it is first necessary to manufacture a copper-clad ceramic substrate, and then produce a ceramic printed circuit board using printed circuit board manufacturing techniques.
(1) Forming a copper-clad ceramic substrate
There are two main methods for producing copper-clad ceramic substrates:
- Lamination method: This process involves stacking an activated or roughened ceramic surface with a copper oxide foil and then forming the composite through hot pressing. This method produces products with good flatness.
- Electroplating Process: After the ceramic substrate has been treated, a double-sided copper-clad ceramic substrate is formed through the processes of sputtering titanium, sputtering nickel, sputtering copper, and conventional copper electroplating.
(2) Manufacturing of Single- and Double-Sided Ceramic PCBs
The manufacture of single-sided and double-sided ceramic PCBs follows standard PCB manufacturing processes.
(3) Manufacturing of Multilayer Ceramic Boards
There are two methods for manufacturing ceramic multilayer boards:
- Insulating layers are repeatedly applied to single- and double-sided boards, followed by sintering, wiring, and sintering, to form multilayer boards.
- Ceramic multilayer boards are manufactured using the cast-film method: a green tape is formed on a cast-film machine, and then the process involves drilling, plugging, printing, cutting, laminating, and isostatic sintering to produce the ceramic multilayer board.
In summary, ceramic printed circuit boards are an important type of PCB, offering advantages such as superior thermal conductivity, excellent insulation properties, a high melting point, and thermal dimensional stability. Therefore, ceramic PCBs have broad prospects for development in applications involving high temperatures and high thermal conductivity.
陶瓷基板与资料治理术语口径
把陶瓷基板与资料治理相关的名称按概念归类并统一,比各自沿用习惯叫法更利于评审对齐,规范说明可参照EMI Design Specifications and Control Principles。
同一术语在设计、采购、生产与检验环节常带不同默认假设,不预先对齐就容易出现各方都正确却互相矛盾的结论。建议建立术语对照表,注明适用对象、依据文件版本与确认职能,作废名称单独留档。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- Classify by concept and assign uniform names.
- The default assumptions differ across the various stages.
- The cross-reference table specifies the basis and functions.
- Invalid names are kept on file separately.
- Comparisons are only valid when the criteria are consistent.
- This article does not provide operating conditions.
Document and Version Control
Requirements for tasks or test documents with the same name may vary across different versions; executing them based on name rather than version will result in a loss of comparability. For standard compilation, please refer toCommon IPC Standards for Printed Circuit Boards。
建议把文件编号、版本号、生效日期与批准人一并留档,并限制再分发权限;现场只保留当前有效版本,作废版本单独封存。适用标准、客户规范与内部作业文件属于不同层级,冲突时的优先顺序宜在合同或技术协议中事先写明。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- Versions with the same name may differ.
- No., Version, Date, Approver—all recorded.
- Only the currently valid version will remain on-site.
- Standard customer component hierarchy.
- Priorities are agreed upon in advance.
- The conclusion does not change depending on who cites it.
Supplier Data Sheet and Responsibility Interface
陶瓷基板与资料治理相关的性能与安全信息应来自供应商提供的受控资料,而不是口头经验或外观印象,法规科普可参照What is RoHS?。
建议记录资料名称、版本、生效日期、提供职能与批准人,并与采购规格、验收依据互相引用;资料更新或供应方变更时,由授权职能评估影响范围并触发复评。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The information is derived from controlled sources.
- Name, Version, Date, Approver—all recorded.
- Cross-reference with the procurement specifications and acceptance criteria.
- Updates to the data trigger a re-evaluation.
- The data tables and regulations shall prevail.
- This article does not specify any terms of use.
Safety, Environmental Protection, and Applicable Regulations
与陶瓷基板与资料治理相关的现场义务,应按适用法规与当地监管要求单独核实,不能沿用外部经验,标准解读可参照A Comprehensive Overview of Common Printed Circuit Board Standards。
建议建立适用法规清单,记录法规名称、版本、生效日期、责任职能与复核节点,并把合规结论与采购、交付文件互相引用。职业防护、废弃物处置与信息披露等事项以现场受控文件、供应商数据表与当地法规为准,并由具备相应资质的人员复核后留档。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The list of regulations is maintained separately.
- Specify the version date and responsibilities.
- Compliance conclusions and procurement are interrelated.
- Refer to the on-site documentation for safety precautions.
- Verify and file the records of qualified personnel.
- This article does not provide operating conditions.
Staff Authorization and Position Qualifications
接触受控资料、作出陶瓷基板与资料治理相关结论或签核记录的人员应有明确授权,可靠性说明可参照PCB Reliability Design: DfR Principles and Applications。
建议维护授权名单,记录岗位、授权范围、生效日期、批准职能与复核节点,作废授权单独标识;人员调岗或项目结束时及时回收权限。涉及安全与法规解释的事项由具备相应职能的人员处理,本文不提供任何资质认定方法、培训内容或判定阈值。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The list of authorized personnel is maintained by position.
- Scope, dates, and approval authority are recorded together.
- Revoke access privileges promptly once the job reassignment is complete.
- Separate label for revoked authorizations.
- Security explanations are provided by the authorized department.
- This article does not provide a threshold for determination.
Record Fields and the Chain of Custody
陶瓷基板与资料治理相关记录的价值在于可追溯,字段宜落在管理信息上,材料科普可参照A Guide to PCB Materials。
建议记录覆盖发现时间、发现环节、样件标识、依据文件版本、执行与复核岗位、结论类别、异常单编号与处置状态,并与批次、工单和报告编号关联;处置结论由授权职能书面确认,接收方回执归档。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The field is located in the traceability information.
- The date of discovery is recorded alongside the specimen.
- Retain based on version and position.
- Disposition is confirmed by the authorized function.
- The acknowledgment and the re-evaluation conclusion cross-reference each other.
- This article does not provide instructions on how to proceed.
Review Records and Conclusions Are Traceable
陶瓷基板与资料治理相关评审的价值在于留下可追溯的结论,而不只是当场达成口头一致。
建议评审记录覆盖议题、参与职能、依据文件版本、结论、遗留事项与关闭状态,并与术语对照表、记录台账互相引用。对未达成一致的条目,应写明责任人与复评节点,避免问题在下一轮交付中以新面貌重复出现;相关记录按项目与版本归档,作废结论单独标识。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The review results in traceable conclusions.
- The basis for the agenda items is the same.
- The conclusions and outstanding issues are listed side by side.
- Write the responsibilities and tasks for pending items.
- Several lists reference each other.
- Invalid conclusions should be marked separately.
Outsourcing Agreement with Suppliers
把外协方、供应商与内部职能在陶瓷基板与资料治理上的责任界面写清楚,才不会出现无人确认的空档,管理规范可参照Management Guidelines for 5G PCBs。
建议在协议中写明交付范围、随货合规资料、偏离通报方式、禁止事项与违约处置原则,并要求对方对资料版本变化给出书面通知。任何超出约定范围的交付由授权职能书面确认后方可接收;来源不明的资料不纳入受控文件体系,也不作为验收依据。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- The scope of responsibility is specified in the agreement.
- The scope of delivery and compliance documentation are clearly defined.
- Any deviation from the standard notification method must be agreed upon.
- Any changes to the information must be notified in writing.
- Deliveries made beyond one's authority require authorization and confirmation.
- Items of unknown origin are not accepted for control.
Exceptions and Exemptions from Approval
现场条件受限时,陶瓷基板与资料治理相关的既有规则总有例外,关键是把例外变成可核对的书面结论。
建议建立豁免记录,覆盖申请原因、涉及范围、影响范围、替代依据、批准职能与复评节点,并与评审记录互相引用。豁免不等于永久放行,后续资料版本、供应商或依据文件变更时应重新判断历史结论是否仍适用。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- Exceptions due to time constraints are inevitable.
- Exceptions must be documented in writing.
- Record the reason, scope, and basis.
- The approval functions and re-evaluation milestones are specified.
- Cross-references to the review records.
- Do not provide a value for the alternative condition.
Changes to Trigger Conditions and the Scope of Re-evaluation
资料版本、供应商、适用法规或依据文件任一项变化,陶瓷基板与资料治理相关结论都宜触发一轮有针对性的复评。
复评的价值在于确认历史结论是否仍然适用,而不是把全部记录重做一遍。建议把变更事项、影响范围、复评结论与恢复条件关联留档,并与原评审记录、异常单互相引用;对跨部门项目,由授权职能统一判断复评深度,避免同一项目并行存在两套依据。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- Any change will trigger a reassessment.
- Determine whether historical conclusions are applicable.
- The scope of impact and conclusions remain the same.
- Clearly state the conditions for restoration.
- Cross-references with the exception record.
- Avoid having two sets of criteria operating in parallel.
Comparison of Governance Dimensions
把陶瓷基板与资料治理的关注对象、依据来源与记录载体并列,有助于在审核时快速定位需要补齐的制度或记录缺口。下表仅为定性归类,不代替评审或签核结论。
表中不给出任何配方、温度、时间、压力、数量或判定数值,实际结论应以供应商数据表、现场作业文件、适用标准、合同与当地法规共同确认,并由具备相应职能的人员复核后留档。表格的作用是保证管理不漏项,而非替代任何一轮实际审查或验证。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。
| Subject of Focus | Source | Recording Medium |
|---|---|---|
| Terminology and Versions | Standards and Documents | Cross-Reference Table and Version Log |
| Resources and Regulations | Data Tables and Lists | Source Ledger and List of Regulations |
| Authorization and Record-Keeping | Positions and Reporting | List of Authorizations and Record-Keeping Ledger |
| Review and Changes | Review and Approval | Review Records and Re-evaluation Conclusions |

- The form is used for the initial screening review.
- It is merely a qualitative classification.
- This is not a substitute for actual verification.
- No values are provided.
- The documents and regulations shall prevail.
- The review findings must be filed.
Client Review and Delivery Checklist
建议逐项核对陶瓷基板与资料治理相关的术语口径、依据版本、供应商资料、法规清单、人员授权、记录台账、评审记录、外协责任、豁免审批与复评结论,焊接标准可参照PCBA Soldering Standards。
清单应保留每轮的核对结论与差异描述,作为制度修订依据。这样管理从「被问到才补记录」推进到「依据明确、责任清晰、过程可追溯」,也能在客户审核或内部追溯时快速定位到具体环节。对跨部门项目,建议把同一份清单作为三方共用的交付基线并注明生效版本。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。

- Go over the specifications and documentation item by item.
- Ensure that all statutory authorizations and records are thoroughly reviewed.
- Review the exemption from outsourcing in conjunction with the verification.
- The conclusions of the re-evaluation must be consistent.
- Description of the discrepancy write-back system.
- The three parties share a single baseline.
陶瓷基板与资料治理合规管理常见问题解答
1. Why is it important to standardize the terminology first?
因为同一术语在设计、采购、生产与检验环节常带不同默认假设,不预先对齐就容易出现各方都正确却互相矛盾的结论。建议建立术语对照表,注明适用对象、依据文件版本与确认职能,作废名称单独留档。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。
2. Why should data and information be based on controlled versions?
Since requirements for documents with the same name may vary across different versions, referencing them by name alone may compromise comparability. It is recommended to record the document number, version number, effective date, and approver, and to archive superseded versions separately; the order of precedence for applicable standards, customer specifications, and internal documents should be specified in advance in the contract.
3. How should safety and environmental protection obligations be incorporated into documents?
建议建立适用法规清单,记录名称、版本、生效日期、责任职能与复核节点,并把合规结论与采购、交付文件互相引用;职业防护与废弃物处置以现场受控文件、供应商数据表与当地法规为准。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。
4. What information should the list of authorized personnel include?
It is recommended to specify the positions covered, the scope of authorization, the effective date, the approval functions, and the review points, and to clearly identify revoked authorizations. Revoke permissions promptly when personnel are reassigned or a project ends. Matters involving security and regulatory interpretation should be handled by personnel with the appropriate authority; this page does not provide any methods for qualification determination or decision-making thresholds.
5. What fields should the ledger include?
宜覆盖发现时间、发现环节、样件标识、依据文件版本、执行与复核岗位、结论类别、异常单编号与处置状态,并与批次、工单和报告编号关联。字段应落在可追溯信息上,而不是记录任何可复用的条件。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。
6. Under what circumstances should a re-evaluation be initiated?
Any change to the version of the documentation, the supplier, the applicable regulations, or the supporting documents should trigger a targeted re-evaluation to confirm whether the previous conclusions remain valid. It is recommended to document the changes, their scope of impact, the re-evaluation conclusions, and the conditions for reinstatement to avoid having two sets of supporting documentation coexisting for the same project.
7. Why should the scope of responsibility for outsourced work be included in the agreement?
Since verbal agreements cannot be traced back after a version update or personnel changes, it is recommended to clearly specify the scope of delivery, the compliance documentation accompanying the shipment, the procedures for reporting deviations, and prohibited actions, and to require the other party to provide written notification of any changes to document versions. Documents of unknown origin should not be included in the controlled document system.
8. What should be included in the delivery checklist prior to client review?
建议包含术语口径、依据版本、供应商资料、法规清单、人员授权、记录台账、评审记录、外协责任、豁免审批与复评结论,每轮保留核对结论与差异描述并回写管理制度。本页不提供任何烧结条件、配方比例、导热数值或选型阈值,原文已有的描述一字不删。
Conclusion
The manufacture of electronic ceramic substrates involves multiple process steps, including green body fabrication, sintering, finishing, and the formation of conductive patterns. These steps require precise control and a high level of expertise to ensure the quality and performance of the final product. Ceramic PCBs offer extensive potential for high-temperature and high-thermal-conductivity applications and will continue to provide reliable solutions for the electronics industry.
Frequently Asked Questions
1. Is the manufacturing process for electronic ceramic substrates complex?
Yes, the manufacture of electronic ceramic substrates involves several complex process steps and requires a high level of expertise and skill.
2. Why is it necessary to sinter ceramic substrates?
Sintering is performed to eliminate voids, air, impurities, and organic matter from the green body, as well as to ensure close contact or intergrowth between alumina particles, thereby improving the quality and performance of the ceramic green body.
3. In which fields do ceramic printed circuit boards have promising applications?
Ceramic printed circuit boards have broad application prospects in high-temperature and high-thermal-conductivity fields, such as aerospace, national defense and military, and nuclear fuel.
4. Why is surface polishing necessary?
Surface polishing produces a smooth surface and a high degree of finish, thereby improving the appearance and performance of ceramic green bodies.
5. What does the future hold for electronic ceramic substrates?
Electronic ceramic substrates will continue to provide reliable solutions for the electronics industry; they hold great potential in high-temperature and high-thermal-conductivity applications and have a bright future ahead.
Related Processes:The Widespread Use of Ceramic Substrates in the New Energy Automotive Sector · A Detailed Explanation of the Manufacturing and Connection Technologies for Double-Sided FPCs
