A Tour of the PCB Manufacturing Floor A Look at Each Key Processing Step
From lamination and drilling to imaging and inspection, learn about the production equipment showcased on the previous page by Shenzhen Jingpeng Electronics and its functions. Using actual design documents, further confirm the requirements for materials, structure, processes, and inspection.
Laminating Equipment Showcase | Shenzhen Jingpeng Electronics
Laminating: Converting a stack of layers into a panel structure
Materials, lamination, and pressing conditions must be mutually confirmed. The equipment demonstration is intended to provide an understanding of the production process; the actual processing plan is subject to project review.
Hydraulic Equipment
Used in the panel lamination process; organize processing in accordance with material systems and laminate requirements.
PCB Press
The production of multilayer boards requires control over interlaminar bonding and board structure; specific process parameters are determined based on the materials and product requirements.
Drilling: Preparing hole structures for interlayer interconnects and assembly
PCB Drilling Equipment
Machine the corresponding holes according to the drilling specifications; the hole diameter, hole type, and tolerance must be specified before production begins.
PCB Drilling Equipment Showcase
Different board thicknesses, materials, and hole structures require corresponding processing conditions, and the positioning and quality of the holes are critical to subsequent manufacturing processes.
Imaging and Electroplating: Forming Circuits and Metal Connections
LDI Imaging Equipment
Direct imaging is used in the pattern transfer process; pattern requirements must be reviewed in conjunction with copper thickness, materials, and manufacturing specifications.
VCP Electroplating Equipment
Used in the electroplating process to form the appropriate metal coatings based on product structure and process requirements.
Testing: Check the graphics and electrical connections separately
AOI Inspection Equipment
Optical inspection is used to identify detectable graphical anomalies; the inspection items and coverage are determined based on process requirements.
Flying-Probe Test Equipment
Inspect the electrical connections on the bare board based on the test data; the specific test procedures and acceptance criteria will be confirmed on a project-by-project basis.
Electrical Testing Equipment
Testing is performed on bare boards for electrical issues such as short circuits; electrical testing of bare boards cannot replace PCBA functional testing.
The photos do not directly represent the manufacturing limits or full inspection coverage for a particular product. If you have specific requirements regarding impedance, reliability, reporting, or special acceptance criteria, please specify them separately in your request for quotation.
Turn Equipment Demonstrations into Project Confirmations
Process Capabilities
Review the number of layers, board thickness, drilling, and special processes, and confirm manufacturability based on the complete documentation.
Pre-Production Review
Submit the design documents, clearly specifying any additions or modifications required during manufacturing and assembly.
Quality and Acceptance
Include inspection items, reports, and acceptance requirements in the project documentation to facilitate confirmation prior to production.
Technical Exchange and Site Visit Requests
If you would like to learn more about the production processes related to your project or would like to schedule a factory tour, please specify the type of project, the processes you are most interested in, the number of participants, and your preferred date and time, so that both parties can confirm the specific arrangements.
Submit Your Design for Manufacturing Review
Provide Gerber or ODB++ files, layer stacks, materials, quantities, and inspection requirements to confirm a production plan suitable for the project.
