Solder paste is one of the most critical materials in electronics manufacturing; it is used inSMT(Surface Mount Technology) plays a key role. The performance of solder paste directly affects solder joint quality. This article will explore in depth how solder paste performance affects solder joint quality and analyze the composition of solder paste as well as its performance testing and analysis.

1. Overview
The SMT process includes printing, placement, and soldering, with solder paste printing being a critical step. According to statistics, soldering defects caused by solder paste printing account for 60% to 70% of all SMT defects. Therefore, the quality of the solder paste is crucial to the quality of the solder joints.
2. Composition of Solder Paste
Solder paste is a homogeneous mixture composed of solder alloy powder, flux, and additives, and it possesses a certain viscosity and thixotropy.
2.1 Solder Alloy Powder
Solder alloy powder is the main component of solder paste, accounting for approximately 85% to 90% of the paste’s weight, and serves as the primary material for forming solder joints. Common types of solder alloy powder include tin-lead (Sn-Pb), tin-lead-silver (Sn-Pb-Ag), tin-lead-bismuth (Sn-Pb-Bi), and lead-free solder alloy powder.
2.2 Flux System
Flux serves as a carrier for solder alloy powder. Its primary function is to remove oxides from the surface of the solder alloy powder and the workpiece, reduce the surface tension of the solder, and ensure that the solder wets the surface of the material being soldered effectively. Based on their cleaning requirements, fluxes are classified into organic solvent-cleanable, water-cleanable, and no-clean types. Among these, low-residue no-clean fluxes eliminate the need for subsequent cleaning processes and are environmentally friendly, making them one of the most advanced types of flux currently available.
2.3 Additives
Additives include binders, thixotropic agents, and solvents, among others.
- BinderIts primary function is to ensure that the solder paste adheres well to the pads after it is printed onto them.
- Thixotropic agentIts main function is to ensure that the solder paste has good printability.
- SolventThe viscosity of the solder paste can be adjusted; commonly used solvents include ethanol and isopropyl alcohol. The solvent must evaporate easily at room temperature, provide good printability and release from the stencil, and evaporate quickly during the soldering process to prevent defects such as sagging, solder balls, and bridging.
3. Performance Testing and Analysis of Solder Paste
The performance characteristics of solder paste encompass multiple aspects, including appearance, viscosity, solderability, solder joint strength, thixotropy, slump, adhesion, corrosiveness, the composition, content, particle size, and distribution of the solder alloy powder, the degree of oxidation of the solder, service life, and shelf life.
3.1 Appearance
The solder paste should be a gray, uniform, non-separating paste, and its appearance should comply with the standard.
3.2 Solder Alloy Powder Content
The content of solder alloy powder has a significant impact on the application of solder paste and the soldering results. Generally, solder paste with a content ranging from 85% to 92% should be selected. If the metal powder content is too low, it can easily lead to defects such as paste collapse, bridging, missed solder joints, and solder balls, thereby affecting product quality. As the content increases, the paste becomes thicker, which promotes the formation of full solder joints and facilitates de-stamping and release.
3.3 Shape, Particle Size, and Size Distribution of Solder Alloy Powder
Solder powder comes in two shapes: spherical and elliptical. Spherical powder has a wider range of printability, a smaller surface area, and a lower degree of oxidation, but the solder joints are not as bright; elliptical powder has a narrower range of printability and a higher degree of oxidation, making it prone to defects such as solder balls and missed prints, especially in fine-pitch printing.
The particle size of solder powder has a significant impact on soldering quality. If the particles are too small, the total surface area of the solder increases, leading to severe oxidation, which can cause solder balls and collapse. This results in poor conformality, low resolution, and a higher likelihood of bridging. Conversely, if the particle size is too large, the solder paste cannot pass through the stencil, resulting in underfilled joints and poor electrical connections.
The uniformity of the particle size distribution is also very important; uniform particles help produce crisp, clear, high-resolution solder paste lines.
3.4 Viscosity
The viscosity of solder paste directly affects soldering quality. If the viscosity is too low, it can lead to problems such as paste collapse, bridging, and solder balls; if the viscosity is too high, it can result in missed solder joints. Therefore, an appropriate viscosity should be selected; specifically, for stencil printing with a 0.5 lead pitch, solder paste with a viscosity of 800 to 1,300 Kcps should be used.
3.5 Adhesive Force
The solder paste should have a certain degree of tack to ensure that SMD components do not shift or fall off before soldering, and to ensure that the solder paste adheres more strongly to the pads than to the side walls of the stencil openings, so that the solder paste can be easily removed from the board.
3.6 Slump
The slump of the solder paste should be as small as possible to ensure the shape and quality of the solder joints.
3.7 Degree of Oxidation of Solder Powder
The degree of oxidation is related to the incidence of solder balls. The degree of oxidation should generally be kept below 0.05%, with a maximum limit of 0.15%.
3.8 Solder Balls
Solder balls are a key indicator of solder paste performance. Methods for testing solder balls include observing the convergence of the balls formed on a ceramic tile after the solder paste melts, checking for the presence of a small halo, and assessing the surface finish and residue.
3.9 Weldability
Solderability primarily refers to the solder paste’s ability to wet the workpiece, which depends on the flux’s activity and the degree of oxidation of the solder particles. Solder paste with the appropriate level of activity should be selected based on the specific circumstances.
3.10 Thixotropy
The thixotropic properties of solder paste allow it to flow easily during the printing process and then return to its original viscosity during soldering, ensuring printing resolution and soldering quality.
3.11 Weld Strength
After soldering, the solder paste should possess sufficient mechanical strength to ensure a reliable connection between the circuit board and its components, thereby guaranteeing their electrical and mechanical performance.
3.12 Service Life and Shelf Life
Working life refers to the period from the time the solder paste is printed until it can no longer be used to place components. The shelf life of solder paste is generally 3 to 6 months; it should be stored in a sealed container in a cool place, and the storage period should be kept as short as possible.
The performance of solder paste has a significant impact on solder joint quality; therefore, selecting the appropriate solder paste and conducting performance testing and analysis are critical steps in ensuring high-quality solder joints during the electronics manufacturing process.
Welding Quality and Compliance Governance Terminology Standards
Classifying and standardizing terms related to welding quality and compliance management by concept is more conducive to aligning reviews than continuing to use customary terms; please refer to the standard for guidance.EMI Design Specifications and Control Principles。
The same term often carries different default assumptions across the design, procurement, production, and inspection phases; without prior alignment, it is easy for all parties to arrive at conclusions that are correct in their own right but mutually contradictory. It is recommended to establish a terminology cross-reference table that specifies the scope of application, the version of the reference document, and the responsible party for verification; obsolete terms should be archived separately. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; all descriptions from the original text remain unchanged.

- Classify by concept and assign uniform names.
- The default assumptions differ across the various stages.
- The cross-reference table specifies the basis and functions.
- Invalid names are kept on file separately.
- Comparisons are only valid when the criteria are consistent.
- This article does not provide operating conditions.
Document and Version Control
Requirements for tasks or test documents with the same name may vary across different versions; executing them based on name rather than version will result in a loss of comparability. For standard compilation, please refer toCommon IPC Standards for Printed Circuit Boards。
It is recommended that document numbers, version numbers, effective dates, and approver information be retained in the records, and that redistribution be restricted; only the currently valid version should be kept on-site, while obsolete versions should be stored separately. Applicable standards, customer specifications, and internal operating procedures belong to different levels of hierarchy; the order of precedence in the event of a conflict should be specified in advance in the contract or technical agreement. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- Versions with the same name may differ.
- No., Version, Date, Approver—all recorded.
- Only the currently valid version will remain on-site.
- Standard customer component hierarchy.
- Priorities are agreed upon in advance.
- The conclusion does not change depending on who cites it.
Supplier Data Sheet and Responsibility Interface
Performance and safety information related to welding quality and compliance management should be derived from controlled documentation provided by suppliers, rather than from verbal accounts or visual impressions. For information on relevant regulations, please refer toWhat is RoHS?。
It is recommended to document the name, version, effective date, responsible department, and approver of the documentation, and to cross-reference it with the procurement specifications and acceptance criteria. When the documentation is updated or the supplier changes, the authorized department shall assess the scope of impact and initiate a re-evaluation. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already included in the original text remain unchanged.

- The information is derived from controlled sources.
- Name, Version, Date, Approver—all recorded.
- Cross-reference with the procurement specifications and acceptance criteria.
- Updates to the data trigger a re-evaluation.
- The data tables and regulations shall prevail.
- This article does not specify any terms of use.
Safety, Environmental Protection, and Applicable Regulations
On-site obligations related to welding quality and compliance management should be verified independently in accordance with applicable laws and local regulatory requirements; reliance on external experience is not permitted. For guidance on interpreting standards, please refer toA Comprehensive Overview of Common Printed Circuit Board Standards。
It is recommended to establish a list of applicable regulations that records the regulation name, version, effective date, responsible functions, and review milestones, and to cross-reference compliance conclusions with procurement and delivery documents. Matters such as occupational protection, waste disposal, and information disclosure shall be governed by on-site controlled documents, supplier data sheets, and local regulations, and shall be reviewed by appropriately qualified personnel before being filed. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions in the original text remain unchanged.

- The list of regulations is maintained separately.
- Specify the version date and responsibilities.
- Compliance conclusions and procurement are interrelated.
- Refer to the on-site documentation for safety precautions.
- Verify and file the records of qualified personnel.
- This article does not provide operating conditions.
Staff Authorization and Position Qualifications
Personnel who access controlled information, draw conclusions regarding welding quality and compliance management, or sign off on records must have explicit authorization; for guidance on reliability, please refer toPCB Reliability Design: DfR Principles and Applications。
It is recommended to maintain an authorization list that records job titles, scope of authorization, effective dates, approving authorities, and review points, with revoked authorizations clearly marked. Revoke permissions promptly when personnel are reassigned or a project ends. Matters involving safety and regulatory interpretation should be handled by personnel with the appropriate authority; this document does not provide any methods for qualification determination, training content, or assessment thresholds. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- The list of authorized personnel is maintained by position.
- Scope, dates, and approval authority are recorded together.
- Revoke access privileges promptly once the job reassignment is complete.
- Separate label for revoked authorizations.
- Security explanations are provided by the authorized department.
- This article does not provide a threshold for determination.
Record Fields and the Chain of Custody
The value of records related to welding quality and compliance management lies in their traceability; these fields should be included in management information. For general information on materials, please refer to the following:A Guide to PCB Materials。
It is recommended to record the time of discovery, the stage at which the issue was discovered, the sample identification, the version of the reference document, the positions responsible for execution and review, the conclusion category, the nonconformance report number, and the resolution status, and to link this information to the batch, work order, and report numbers. The resolution conclusion must be confirmed in writing by an authorized official, and the recipient’s acknowledgment must be filed. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- The field is located in the traceability information.
- The date of discovery is recorded alongside the specimen.
- Retain based on version and position.
- Disposition is confirmed by the authorized function.
- The acknowledgment and the re-evaluation conclusion cross-reference each other.
- This article does not provide instructions on how to proceed.
Review Records and Conclusions Are Traceable
The value of audits related to welding quality and compliance management lies in producing traceable conclusions, rather than merely reaching a verbal agreement on the spot.
It is recommended that review records include the topic, participating functions, the version of the reference document, conclusions, outstanding items, and closure status, and that they cross-reference the glossary and record ledger. For items on which consensus has not been reached, the responsible person and the date for re-evaluation should be specified to prevent the issue from recurring in a different form in the next delivery cycle; relevant records should be archived by project and version, and invalid conclusions should be clearly marked. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; descriptions already present in the original text remain unchanged.

- The review results in traceable conclusions.
- The basis for the agenda items is the same.
- The conclusions and outstanding issues are listed side by side.
- Write the responsibilities and tasks for pending items.
- Several lists reference each other.
- Invalid conclusions should be marked separately.
Outsourcing Agreement with Suppliers
Clearly define the boundaries of responsibility between external contractors, suppliers, and internal functions regarding welding quality and compliance management to avoid gaps where no one is responsible for verification. Management guidelines can be referenced as follows:Management Guidelines for 5G PCBs。
It is recommended that the agreement specify the scope of delivery, compliance documentation accompanying the goods, procedures for reporting deviations, prohibited actions, and principles for handling breaches of contract; it should also require the other party to provide written notice of any changes to document versions. Any delivery beyond the agreed scope may only be accepted after written confirmation by the authorized function; documents of unknown origin shall not be included in the controlled document system nor used as the basis for acceptance. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- The scope of responsibility is specified in the agreement.
- The scope of delivery and compliance documentation are clearly defined.
- Any deviation from the standard notification method must be agreed upon.
- Any changes to the information must be notified in writing.
- Deliveries made beyond one's authority require authorization and confirmation.
- Items of unknown origin are not accepted for control.
Exceptions and Exemptions from Approval
When on-site conditions are limited, there are always exceptions to existing rules regarding welding quality and compliance management; the key is to turn those exceptions into verifiable, written conclusions.
It is recommended to establish an exemption record that covers the reason for the request, scope of application, scope of impact, basis for substitution, approval authority, and re-evaluation milestones, and that cross-references the review record. An exemption does not constitute permanent approval; when subsequent versions of documentation, suppliers, or supporting documents change, a reassessment should be conducted to determine whether the historical conclusion remains applicable. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- Exceptions due to time constraints are inevitable.
- Exceptions must be documented in writing.
- Record the reason, scope, and basis.
- The approval functions and re-evaluation milestones are specified.
- Cross-references to the review records.
- Do not provide a value for the alternative condition.
Changes to Trigger Conditions and the Scope of Re-evaluation
Any change in the version of the documentation, the supplier, the applicable regulations, or the supporting documents should trigger a targeted reassessment of conclusions related to welding quality and compliance management.
The value of a re-evaluation lies in confirming whether historical conclusions remain valid, rather than redoing the entire record from scratch. It is recommended to document changes, their scope of impact, re-evaluation conclusions, and conditions for restoration, and to cross-reference these with the original evaluation records and nonconformance reports. For cross-departmental projects, the authorized department should uniformly determine the scope of the re-evaluation to avoid having two sets of criteria coexisting for the same project. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- Any change will trigger a reassessment.
- Determine whether historical conclusions are applicable.
- The scope of impact and conclusions remain the same.
- Clearly state the conditions for restoration.
- Cross-references with the exception record.
- Avoid having two sets of criteria operating in parallel.
Comparison of Governance Dimensions
Comparing welding quality with the focus areas, sources of evidence, and record-keeping methods used in compliance management helps quickly identify gaps in policies or records that need to be addressed during an audit. The table below provides only a qualitative classification and does not replace the conclusions of an audit or approval review.
The table does not provide any formulations, temperatures, times, pressures, quantities, or acceptance criteria. Actual conclusions must be jointly confirmed based on the supplier’s data sheets, on-site operating procedures, applicable standards, contracts, and local regulations, and must be reviewed by personnel with the appropriate qualifications before being filed. The purpose of the table is to ensure that no management items are overlooked; it is not intended to replace any round of actual review or validation. This page does not provide any welding temperatures, times, filler metal ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.
| Subject of Focus | Source | Recording Medium |
|---|---|---|
| Terminology and Versions | Standards and Documents | Cross-Reference Table and Version Log |
| Resources and Regulations | Data Tables and Lists | Source Ledger and List of Regulations |
| Authorization and Record-Keeping | Positions and Reporting | List of Authorizations and Record-Keeping Ledger |
| Review and Changes | Review and Approval | Review Records and Re-evaluation Conclusions |

- The form is used for the initial screening review.
- It is merely a qualitative classification.
- This is not a substitute for actual verification.
- No values are provided.
- The documents and regulations shall prevail.
- The review findings must be filed.
Client Review and Delivery Checklist
It is recommended to verify, item by item, the definitions of terms related to welding quality and compliance management, the applicable versions of reference documents, supplier documentation, lists of regulations, personnel authorizations, record-keeping ledgers, review records, responsibilities for outsourced work, exemption approvals, and re-evaluation conclusions. For welding standards, please refer toPCBA Soldering Standards。
The checklist should retain the verification conclusions and descriptions of discrepancies for each round as a basis for revising the procedures. This approach advances management from “filling in records only when asked” to a system characterized by “clear guidelines, defined responsibilities, and traceable processes,” and also enables the rapid identification of specific steps during customer audits or internal traceability reviews. For cross-departmental projects, it is recommended that a single checklist be used as a delivery baseline shared by all three parties, with the effective version clearly indicated. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.

- Go over the specifications and documentation item by item.
- Ensure that all statutory authorizations and records are thoroughly reviewed.
- Review the exemption from outsourcing in conjunction with the verification.
- The conclusions of the re-evaluation must be consistent.
- Description of the discrepancy write-back system.
- The three parties share a single baseline.
Welding Quality and Compliance Governance: Frequently Asked Questions on Compliance Management
1. Why is it important to standardize the terminology first?
Because the same term often carries different underlying assumptions in the design, procurement, production, and inspection phases, failure to align these assumptions in advance can easily lead to conclusions that are correct from each party’s perspective but mutually contradictory. It is recommended to establish a terminology cross-reference table that specifies the scope of application, the version of the reference document, and the approving authority; obsolete terms should be archived separately. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.
2. Why should data and information be based on controlled versions?
Since requirements for documents with the same name may vary across different versions, referencing them by name alone may compromise comparability. It is recommended to record the document number, version number, effective date, and approver, and to archive superseded versions separately; the order of precedence for applicable standards, customer specifications, and internal documents should be specified in advance in the contract.
3. How should safety and environmental protection obligations be incorporated into documents?
It is recommended to establish a list of applicable regulations, documenting the names, versions, effective dates, responsible functions, and review milestones, and to cross-reference compliance conclusions with procurement and delivery documents; occupational safety and waste disposal shall be governed by on-site controlled documents, supplier data sheets, and local regulations. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.
4. What information should the list of authorized personnel include?
It is recommended to specify the positions covered, the scope of authorization, the effective date, the approval functions, and the review points, and to clearly identify revoked authorizations. Revoke permissions promptly when personnel are reassigned or a project ends. Matters involving security and regulatory interpretation should be handled by personnel with the appropriate authority; this page does not provide any methods for qualification determination or decision-making thresholds.
5. What fields should the ledger include?
This should include the time of discovery, the stage at which it was discovered, the sample identification, the version of the reference document, the positions responsible for execution and review, the conclusion category, the nonconformance report number, and the resolution status, and should be linked to the batch, work order, and report numbers. The fields should focus on traceability information rather than recording any reusable conditions. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.
6. Under what circumstances should a re-evaluation be initiated?
Any change to the version of the documentation, the supplier, the applicable regulations, or the supporting documents should trigger a targeted re-evaluation to confirm whether the previous conclusions remain valid. It is recommended to document the changes, their scope of impact, the re-evaluation conclusions, and the conditions for reinstatement to avoid having two sets of supporting documentation coexisting for the same project.
7. Why should the scope of responsibility for outsourced work be included in the agreement?
Since verbal agreements cannot be traced back after a version update or personnel changes, it is recommended to clearly specify the scope of delivery, the compliance documentation accompanying the shipment, the procedures for reporting deviations, and prohibited actions, and to require the other party to provide written notification of any changes to document versions. Documents of unknown origin should not be included in the controlled document system.
8. What should be included in the delivery checklist prior to client review?
Recommendations should include terminology definitions, applicable versions, supplier information, a list of regulations, personnel authorizations, record-keeping logs, review records, responsibilities for outsourced work, exemptions from approval, and re-evaluation conclusions. For each round, retain the verification conclusions and descriptions of discrepancies, and update the management system accordingly. This page does not provide any welding temperatures, times, solder ratios, or defect repair methods; the descriptions already present in the original text remain unchanged.
Conclusion
This article provides an in-depth exploration of the importance of solder paste performance to solder joint quality, as well as the composition of solder paste and methods for testing and analyzing its performance. The proper selection and use of solder paste are critical to ensuring high-quality solder joints in the electronics manufacturing process. By understanding the key factors affecting solder paste performance, manufacturers and engineers can better optimize their soldering processes and improve product quality and reliability.
Exclusive FAQs (Frequently Asked Questions)
1. How does the degree of oxidation of solder paste affect soldering quality?
- The degree of oxidation is related to the incidence of solder balls. The degree of oxidation should be kept below 0.05% to avoid soldering problems.
2. Why is viscosity one of the key performance indicators for solder paste?
- Viscosity directly affects soldering quality. If the viscosity is too low, it may cause the solder paste to collapse or form bridges, while if it is too high, it may result in solder gaps.
3. Why are the particle size and size distribution of solder powder important?
- The particle size and distribution of solder powder affect soldering quality and resolution. Uniform particles help ensure high-quality soldering.
4. How to Choose the Right Solvent for Solder Paste?
- Selecting solder paste with the appropriate level of activity depends on specific requirements. Excessive activity increases the spread of the solder, which can easily lead to bridging, while insufficient activity may cause solder balls.
5. Why are service life and shelf life important?
- Service life and shelf life affect the stability of solder paste. Proper storage and use ensure that the solder paste’s performance remains intact and guarantee soldering quality.
By gaining a thorough understanding of solder paste performance, you can optimize the soldering process and improve soldering quality, thereby ensuring reliability and performance in the electronics manufacturing process. Selecting the right solder paste and conducting performance tests are critical steps and key factors in the success of the electronics manufacturing industry.
Additional Information:The Impact of PCB Via Solderability on Soldering Quality and Optimization Methods
