Opens in a new tab

What requirements must a flux meet? Chemical activity, thermal stability, and wettability

Published: October 3, 2026 · Updated: October 3, 2026

Flux is an indispensable part of the welding process; it serves multiple functions that help ensure high-quality welds. In this article, we will take an in-depth look at the basics of flux, explore its role in welding, and examine key factors related to the welding process.

Requirements for Surface-Mount Soldering Flux

1. Chemical Activity

Flux must possess a certain degree of chemical reactivity to function effectively during the soldering process. It reacts chemically with the solder and the substrate surface, helping to remove oxides and promote solder wetting.

2. Thermal Stability

Good thermal stability is one of the key properties of a flux. During high-temperature soldering, the flux must maintain its performance without decomposing or losing effectiveness.

3. Wettability

Flux must have good wettability, which means it can quickly cover the soldering surface and reduce the surface tension of the solder, allowing it to spread evenly and wet the soldering area.

4. Expanded Role

The flux should promote the spread of the solder so that it fully covers the soldering area, ensuring the quality of the solder joint.

5. Cleanability

Flux residues must be easy to clean off to ensure that no residue remains on the surface after soldering, which could affect the product's performance.

6. Low chlorine content

The chlorine content should generally be kept below 0.2% (W/W) to avoid adverse effects on the welding materials.

The Role of Flux

In the welding process, flux plays a critical role, primarily in the following areas:

Auxiliary Heat Transfer

Flux helps improve heat transfer and ensures that the solder melts evenly and wets the surfaces to be joined.

Removing Oxides

The active ingredients in the flux react with the oxides on the substrate's surface, removing the oxide layer and making the solder joint more reliable.

Reduce surface tension

By reducing the surface tension of the solder, the flux helps the solder spread evenly across the soldering area, thereby improving the quality of the solder joint.

Prevent Reoxidation

At high temperatures, the flux forms a protective layer over the surface of the solder, preventing re-oxidation and ensuring the quality of the solder joint.

Physical Properties of Flux

The physical properties of flux include melting point, boiling point, softening point, vitrification temperature, vapor pressure, surface tension, viscosity, and miscibility. These properties are closely related to soldering performance and must be taken into account when selecting and using flux.

Defects Caused by Flux Residue and Countermeasures

Flux residue can cause certain problems, so appropriate measures must be taken to address them:

Question

  • It is somewhat corrosive to the substrate.
  • Reduced electrical conductivity may cause migration or short circuits.
  • Non-conductive solid residues may affect component contact.
  • Excessive resin residue can affect product reliability.

Countermeasures

  • Select a suitable flux with a moderate level of activator activity.
  • Use a flux that forms a protective film after welding
  • Use a flux that leaves no resin residue after welding
  • Use a no-clean flux with low solid content
  • Clean the area thoroughly after welding.

Flux Classification Codes Specified in QQ-S-571E

According to the QQ-S-571E standard, fluxes can be classified using different codes, which reflect their type and properties. Some common codes include:

  • S: Moderately solid (no flux)
  • R: Rosin flux
  • RMA: Low-activity rosin flux
  • RA: Active rosin or resin flux
  • AC: Flux containing no rosin or resin

Synthetic resin fluxes in the United States are also classified using specific codes, such as SR, SMAR, SAR, and SSAR, which reflect the different types and activity levels of synthetic resin fluxes.

Flux Spraying Methods and Process Factors

During the welding process, flux can be applied to the weld surface using various spraying methods. The following are some common spraying methods:

1. Ultrasonic Spraying

Ultrasonic spraying uses oscillating electrical energy to atomize the solder paste, which is then sprayed onto the PCB through a pressure nozzle. This method ensures uniform application.

2. Screen Sealing Method

The screen-coating method uses a fine mesh screen and an air knife to spray the flux, creating a mist that covers the PCB.

3. Spray Coating with a Pressure Nozzle

Pressure-nozzle spraying involves using pressure and air to eject flux directly from the nozzle; it is typically used for welding large areas.

Key factors to consider in the spray coating process include pore size, nozzle shape, nozzle spacing, ultrasonic atomizer voltage, nozzle movement speed, PCB conveyor belt speed, and the solid content of the flux.

Terminology for Welding Materials and Compliance Governance

Classifying and standardizing the terminology related to welding materials and compliance governance by concept is more conducive to aligning reviews than continuing to use customary terms; please refer to the standard for guidance.EMI Design Specifications and Control Principles。

The same term often carries different default assumptions across the design, procurement, production, and inspection phases; without prior alignment, it is easy for all parties to arrive at conclusions that are correct in their own right but mutually contradictory. It is recommended to establish a terminology cross-reference table that specifies the applicable scope, the version of the reference document, and the responsible party for verification; obsolete terms should be archived separately. This page does not provide any formulations, activity levels, temperatures, times, or judgment thresholds; descriptions already present in the original text remain unchanged.

Terminology for Welding Materials and Compliance Governance

  • Classify by concept and assign uniform names.
  • The default assumptions differ across the various stages.
  • The cross-reference table specifies the basis and functions.
  • Invalid names are kept on file separately.
  • Comparisons are only valid when the criteria are consistent.
  • This article does not provide operating conditions.

Document and Version Control

Requirements for tasks or test documents with the same name may vary across different versions; executing them based on name rather than version will result in a loss of comparability. For standard compilation, please refer toCommon IPC Standards for Printed Circuit Boards。

It is recommended that document numbers, version numbers, effective dates, and approver information be retained in the records, and that redistribution be restricted; only the currently valid version should be kept on-site, while obsolete versions should be stored separately. Applicable standards, customer specifications, and internal operating procedures belong to different levels of hierarchy; the order of precedence in the event of a conflict should be specified in advance in the contract or technical agreement. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

Document and Version Control

  • Versions with the same name may differ.
  • No., Version, Date, Approver—all recorded.
  • Only the currently valid version will remain on-site.
  • Standard customer component hierarchy.
  • Priorities are agreed upon in advance.
  • The conclusion does not change depending on who cites it.

Supplier Data Sheet and Responsibility Interface

Performance and safety information regarding welding materials and compliance management should be derived from controlled documentation provided by suppliers, rather than from verbal accounts or visual impressions. For information on relevant regulations, please refer toWhat is RoHS?。

It is recommended to document the name, version, effective date, responsible department, and approver of the documentation, and to cross-reference it with the procurement specifications and acceptance criteria; when the documentation is updated or the supplier changes, the authorized department shall assess the scope of impact and initiate a re-evaluation. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

Supplier Data Sheet and Responsibility Interface

  • The information is derived from controlled sources.
  • Name, Version, Date, Approver—all recorded.
  • Cross-reference with the procurement specifications and acceptance criteria.
  • Updates to the data trigger a re-evaluation.
  • The data tables and regulations shall prevail.
  • This article does not specify any terms of use.

Safety, Environmental Protection, and Applicable Regulations

On-site obligations related to welding materials and compliance governance should be verified separately in accordance with applicable laws and local regulatory requirements; reliance on external experience is not permitted. For guidance on interpreting standards, please refer toA Comprehensive Overview of Common Printed Circuit Board Standards。

It is recommended to establish a list of applicable regulations that records the regulation name, version, effective date, responsible functions, and review milestones, and to cross-reference compliance conclusions with procurement and delivery documents. Matters such as occupational protection, waste disposal, and information disclosure shall be governed by on-site controlled documents, supplier data sheets, and local regulations, and shall be reviewed by appropriately qualified personnel before being filed. This page does not provide any formulations, activity levels, temperatures, times, or determination thresholds; all descriptions already present in the original text remain unchanged.

Safety, Environmental Protection, and Applicable Regulations

  • The list of regulations is maintained separately.
  • Specify the version date and responsibilities.
  • Compliance conclusions and procurement are interrelated.
  • Refer to the on-site documentation for safety precautions.
  • Verify and file the records of qualified personnel.
  • This article does not provide operating conditions.

Staff Authorization and Position Qualifications

Personnel who access controlled information, draw conclusions regarding welding materials and compliance management, or approve records must have explicit authorization; for a description of reliability, please refer toPCB Reliability Design: DfR Principles and Applications。

It is recommended to maintain an authorization list that records job titles, scope of authorization, effective dates, approving authorities, and review points, with revoked authorizations clearly marked. Revoke permissions promptly when personnel are reassigned or a project ends. Matters involving safety and regulatory interpretation should be handled by personnel with the appropriate authority; this document does not provide any methods for qualification determination, training content, or assessment thresholds. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; all descriptions present in the original text remain unchanged.

Staff Authorization and Position Qualifications

  • The list of authorized personnel is maintained by position.
  • Scope, dates, and approval authority are recorded together.
  • Revoke access privileges promptly once the job reassignment is complete.
  • Separate label for revoked authorizations.
  • Security explanations are provided by the authorized department.
  • This article does not provide a threshold for determination.

Record Fields and the Chain of Custody

The value of records related to welding materials and compliance management lies in their traceability; the relevant fields should be included in management information, and reference can be made to the materials overview.A Guide to PCB Materials。

It is recommended to document the time of discovery, the stage at which the discovery occurred, the sample identification, the version of the reference document, the positions responsible for execution and review, the conclusion category, the nonconformance report number, and the disposition status, and to link this information to the batch, work order, and report numbers. The disposition conclusion must be confirmed in writing by an authorized official, and the recipient’s acknowledgment must be filed. This page does not provide any formulations, activity levels, temperatures, times, or determination thresholds; the descriptions already present in the original text remain unchanged.

Record Fields and the Chain of Custody

  • The field is located in the traceability information.
  • The date of discovery is recorded alongside the specimen.
  • Retain based on version and position.
  • Disposition is confirmed by the authorized function.
  • The acknowledgment and the re-evaluation conclusion cross-reference each other.
  • This article does not provide instructions on how to proceed.

Review Records and Conclusions Are Traceable

The value of audits related to welding materials and compliance management lies in producing traceable conclusions, rather than merely reaching a verbal agreement on the spot.

It is recommended that review records include the topic, participating functions, the version of the reference document, conclusions, outstanding items, and closure status, and that they cross-reference the glossary and record ledger. For items on which consensus was not reached, the responsible person and the date for re-evaluation should be specified to prevent the issue from recurring in a different form in the next delivery cycle; Relevant records shall be archived by project and version, with invalid conclusions clearly marked. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; descriptions already present in the original text remain unchanged.

Review Records and Conclusions Are Traceable

  • The review results in traceable conclusions.
  • The basis for the agenda items is the same.
  • The conclusions and outstanding issues are listed side by side.
  • Write the responsibilities and tasks for pending items.
  • Several lists reference each other.
  • Invalid conclusions should be marked separately.

Outsourcing Agreement with Suppliers

Clearly define the boundaries of responsibility between external contractors, suppliers, and internal functions regarding welding materials and compliance governance to avoid any gaps where no one is responsible for verification. Management guidelines can be referenced as follows:Management Guidelines for 5G PCBs。

It is recommended that the agreement specify the scope of delivery, compliance documentation accompanying the goods, procedures for reporting deviations, prohibited actions, and principles for handling breaches of contract, and require the other party to provide written notice of any changes to document versions. Any delivery beyond the agreed scope may only be accepted after written confirmation by the authorized function; documents of unknown origin shall not be included in the controlled document system nor used as the basis for acceptance. This page does not provide any formulations, activity levels, temperatures, times, or determination thresholds; the descriptions already present in the original text remain unchanged.

Outsourcing Agreement with Suppliers

  • The scope of responsibility is specified in the agreement.
  • The scope of delivery and compliance documentation are clearly defined.
  • Any deviation from the standard notification method must be agreed upon.
  • Any changes to the information must be notified in writing.
  • Deliveries made beyond one's authority require authorization and confirmation.
  • Items of unknown origin are not accepted for control.

Exceptions and Exemptions from Approval

When on-site conditions are limited, there are always exceptions to existing rules regarding welding materials and compliance management; the key is to turn those exceptions into verifiable written conclusions.

It is recommended to establish an exemption record that covers the reason for the request, the scope of application, the scope of impact, the basis for substitution, the approving authority, and the re-evaluation milestones, and that cross-references the review record. An exemption does not constitute permanent approval; when subsequent versions of documentation, suppliers, or supporting documents change, a reassessment should be conducted to determine whether the historical conclusion remains applicable. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

Exceptions and Exemptions from Approval

  • Exceptions due to time constraints are inevitable.
  • Exceptions must be documented in writing.
  • Record the reason, scope, and basis.
  • The approval functions and re-evaluation milestones are specified.
  • Cross-references to the review records.
  • Do not provide a value for the alternative condition.

Changes to Trigger Conditions and the Scope of Re-evaluation

Any change in the version of the documentation, the supplier, the applicable regulations, or the supporting documents should trigger a targeted reassessment of the conclusions regarding welding materials and compliance management.

The value of a re-evaluation lies in confirming whether historical conclusions remain valid, rather than redoing the entire record from scratch. It is recommended to document changes, the scope of impact, re-evaluation conclusions, and conditions for reinstatement, and to cross-reference these with the original evaluation records and nonconformance reports. For cross-departmental projects, the authorized function should uniformly determine the depth of the re-evaluation to avoid having two sets of criteria coexisting for the same project. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

Changes to Trigger Conditions and the Scope of Re-evaluation

  • Any change will trigger a reassessment.
  • Determine whether historical conclusions are applicable.
  • The scope of impact and conclusions remain the same.
  • Clearly state the conditions for restoration.
  • Cross-references with the exception record.
  • Avoid having two sets of criteria operating in parallel.

Comparison of Governance Dimensions

Comparing welding materials with the focus areas, sources of reference, and record-keeping formats for compliance governance helps quickly identify gaps in policies or records that need to be addressed during an audit. The table below is intended solely for qualitative classification and does not replace the conclusions of an audit or approval review.

The table does not provide any formulations, temperatures, times, pressures, quantities, or acceptance criteria. Actual conclusions must be jointly confirmed based on the supplier’s data sheets, on-site operating procedures, applicable standards, contracts, and local regulations, and must be reviewed by personnel with the appropriate qualifications before being filed. The purpose of the table is to ensure that no management items are overlooked; it is not intended to replace any round of actual review or validation. This page does not provide any formulations, activity levels, temperatures, times, or pass/fail thresholds; the original text has been retained verbatim.

Comparison of Governance Dimensions

  • The form is used for the initial screening review.
  • It is merely a qualitative classification.
  • This is not a substitute for actual verification.
  • No values are provided.
  • The documents and regulations shall prevail.
  • The review findings must be filed.

Client Review and Delivery Checklist

It is recommended to verify, item by item, the terminology, reference versions, supplier information, list of regulations, personnel authorizations, record-keeping ledgers, review records, responsibilities for outsourced work, exemption approvals, and re-evaluation conclusions related to welding materials and compliance management. For welding standards, please refer toPCBA Soldering Standards。

The checklist should retain the verification conclusions and descriptions of discrepancies for each round as a basis for revising the procedures. This approach advances management from “filling in records only when asked” to a system characterized by “clear guidelines, defined responsibilities, and traceable processes,” and also enables the rapid identification of specific steps during client audits or internal traceability reviews. For cross-departmental projects, it is recommended that a single checklist be used as a delivery baseline shared by all three parties, with the effective version clearly indicated. This page does not provide any formulas, activity levels, temperatures, times, or decision thresholds; all descriptions from the original text remain unchanged.

Client Review and Delivery Checklist

  • Go over the specifications and documentation item by item.
  • Ensure that all statutory authorizations and records are thoroughly reviewed.
  • Review the exemption from outsourcing in conjunction with the verification.
  • The conclusions of the re-evaluation must be consistent.
  • Description of the discrepancy write-back system.
  • The three parties share a single baseline.

Welding Materials and Compliance Governance: Frequently Asked Questions on Compliance Management

1. Why is it important to standardize the terminology first?

Because the same term often carries different underlying assumptions in the design, procurement, production, and inspection phases, failure to align these assumptions in advance can easily lead to conclusions that are correct from each party’s perspective but mutually contradictory. It is recommended to establish a glossary of terms, specifying the scope of application, the version of the reference document, and the responsible party for verification, while retaining obsolete terms in a separate archive. This page does not provide any formulations, activity levels, temperatures, times, or judgment thresholds; descriptions already present in the original text remain unchanged.

2. Why should data and information be based on controlled versions?

Since requirements for documents with the same name may vary across different versions, referencing them by name alone may compromise comparability. It is recommended to record the document number, version number, effective date, and approver, and to archive superseded versions separately; the order of precedence for applicable standards, customer specifications, and internal documents should be specified in advance in the contract.

3. How should safety and environmental protection obligations be incorporated into documents?

It is recommended to establish a list of applicable regulations, documenting the names, versions, effective dates, responsible functions, and review milestones, and to cross-reference compliance conclusions with procurement and delivery documents; occupational protection and waste disposal shall be governed by on-site controlled documents, supplier data sheets, and local regulations. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

4. What information should the list of authorized personnel include?

It is recommended to specify the positions covered, the scope of authorization, the effective date, the approval functions, and the review points, and to clearly identify revoked authorizations. Revoke permissions promptly when personnel are reassigned or a project ends. Matters involving security and regulatory interpretation should be handled by personnel with the appropriate authority; this page does not provide any methods for qualification determination or decision-making thresholds.

5. What fields should the ledger include?

This should include the time of discovery, the stage at which it was discovered, the sample identification, the version of the reference document, the positions responsible for execution and review, the conclusion category, the nonconformance report number, and the disposition status, and should be linked to the batch, work order, and report numbers. The fields should focus on traceability information rather than recording any reusable conditions. This page does not provide any formulations, activity levels, temperatures, times, or decision thresholds; the descriptions already present in the original text remain unchanged.

6. Under what circumstances should a re-evaluation be initiated?

Any change to the version of the documentation, the supplier, the applicable regulations, or the supporting documents should trigger a targeted re-evaluation to confirm whether the previous conclusions remain valid. It is recommended to document the changes, their scope of impact, the re-evaluation conclusions, and the conditions for reinstatement to avoid having two sets of supporting documentation coexisting for the same project.

7. Why should the scope of responsibility for outsourced work be included in the agreement?

Since verbal agreements cannot be traced back after a version update or personnel changes, it is recommended to clearly specify the scope of delivery, the compliance documentation accompanying the shipment, the procedures for reporting deviations, and prohibited actions, and to require the other party to provide written notification of any changes to document versions. Documents of unknown origin should not be included in the controlled document system.

8. What should be included in the delivery checklist prior to client review?

Recommendations should include terminology definitions, applicable versions, supplier information, a list of regulations, personnel authorizations, record-keeping logs, review records, responsibilities for outsourced work, exemptions from approval, and re-evaluation conclusions. For each round, retain the verification conclusions and descriptions of discrepancies, and incorporate them into the management system. This page does not provide any formulations, potency levels, temperatures, times, or decision thresholds; all descriptions already present in the original text remain unchanged.

Key Characteristics of No-Clean Flux

No-clean flux is a special type of flux with the following main characteristics:

  • It has good solderability, producing full solder joints without defects such as solder balls or bridging.
  • Non-toxic, environmentally friendly, and safe to use.
  • After welding, the plate surface is dry, non-corrosive, and non-stick.
  • Online testing capabilities are available after welding.
  • It is compatible with SMD and PCB boards.
  • After welding, the surface insulation resistance (SIR) meets the specified requirements.

In summary, flux plays an indispensable role in the welding process; it helps improve weld quality and ensure the reliability of the weld. Selecting the appropriate flux, along with the correct application method and process parameters, is crucial for successful welding.

If you have any questions about flux or other welding-related issues, please feel free to contact us. We will be happy to provide you with assistance and advice.


Frequently Asked Questions

1. What adverse effects can flux residue have on a circuit board?

Flux residue can cause corrosion of the circuit board, reduced electrical conductivity, poor component contact, and compromised product reliability.

2. What is no-clean flux?

No-clean flux is a soldering material that does not require cleaning after soldering and offers a range of advantages, such as being non-toxic, pollution-free, and safe to use.

3. Why is it important to choose the right flux?

Choosing the right flux can improve soldering quality, ensure the reliability of solder joints, and minimize adverse effects on the circuit board.

4. How can you ensure uniform flux application?

To ensure uniform flux application, it is necessary to consider the nozzle orifice size, shape, and spacing, as well as other process factors, such as the ultrasonic atomizer voltage and conveyor belt speed.

5. Why is a flux with good wettability important?

A flux with good wetting properties ensures that the solder is evenly distributed across the soldering area, improving the quality of the solder joints and ensuring the reliability of the solder joint.

Related Processes:Stability and Reliability of Multilayer PCBs · The Impact of PCB Via Solderability on Soldering Quality and Optimization Methods